![]() ![]() So it is best to make sure that the required length is correct and avoid wastage. Not only do you have to buy additional connectors, but any improper operation may also cause the strip to become unusable. In general, it is somewhat troublesome to reconnect the strip after cutting. ![]() If the connected parts do not light up normally, try adjusting the connecting point between the connector and the light strip. Cover the connectorĪfter placing the light strip, close the cover of the connector and try to see if the light strip is lit normally after the power supply is connected. At this point, you should check that they are not reversed by following the picture instruction. Place the two cut ends of the LED light strip into the fastening clips of the connector. Lepro 4-pin strip light connector pack includes 5 pieces of L-shape and 5 pieces of line shape connectors, perfect for both 90° corners connection and extension along a straight line, can be used on almost all the occasions. Yet, the 4pin connects are the most commonly used. If your light strip is 8mm wide and you purchase a 10mm connector, it will not work. If your light strip is 10mm wide, the 4Pin connector you select must be suitable for 10mm. There are many types of strip light connectors, so you need to choose the right one according to the type of light strip. Buy Lepro 4-pin LED strip light connector Generally, this product is not included in a LED light strip set and has to be purchased separately. If you need to reconnect LED light strips after cutting them, you need an additional 4pin connector. So we recommend that you double-check the length of the strip before cutting and avoid the need to reconnect after cutting. However, if the operation is improper when you cut and connect, it may also cause the light strip to stop working properly. If you want to reconnect them after cutting, you must use an additional 4 pin connector to reconnect. Is that possible?Ī: If the LED light strip you purchased can be cut, the remaining part that you have cut off cannot be used anymore. How to Fix LED Strip Lights When Cut Q: I purchased a LED strip lights and used a portion of it, but I also want to use the remaining portion. If you accidentally cut diagonally, it may cause the light to stop working, so make sure you cut straight. The final step is to use your scissors and cut the excess strip along the position marked by the scissors logo. To avoid causing damage, you must find the scissors logo before cutting. ![]() Look for the scissors logo on theįor the convenience of users, manufacturers have placed a scissors logo on the cuttable part of their LED light strips. If you accidentally cut the strip too short, your effort will be wasted. The first thing you should do is measure the right length. If the LED light strip you bought is too long, you need to cut off the extra part. How to Cut LED Strip Lightsīefore cutting light strips, please make sure that the strip you bought can be cut otherwise, cutting the light strip may render it unusable at the same time, you must remember to disconnect the power directly cutting a light strip that is connected to a power supply is extremely dangerous. How to Use LED Strip Lights After Cutting Part 1. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |